OPERATION
Throttle Control
Lever
BladeRotation
Control
Brake Pedal
Pedal
Lift
Lever
Figure 5
LOCATION OF CONTROLS
BLADE ROTATION CONTROL: usethebladerotation
control to start and stop the rotation of the blades.
BRAKE PEDAL: Use the brake pedal to quickly stop.
HEADLIGHT SWITCH: The headlight switch isthe firstpart
of the ignition switch. To use the lights with the engine running, turn
the key to the position for the lights.
IGNITION SWITCH: Usetheignitionswitchtostartandstop
the engine.
AUTOMATIC DRIVE DISCONNECT: usetheauto-
maticdrive disconnect, located under the seat, to disengage the
transmission.
LIFT LEVER: use the liftlever to change the height of cut,
PARKING BRAKE LEVER: usethe parkingbrakelever
to engage the brake when you leave the unit.
SPEED CONTROL PEDAL: usethespeedcontrolpedal
to change the speed and the direction of the unit,
THROTTLE CONTROL LEVER: Usethethrottlecontrol
lever to increase or decrease the speed of the engine,
F- 9889 t 12
To Next Page
Loading...
