Musical Fidelity kW Phono User Manual

Issue 2 (LP) : 10 March 2005
kW Phono Preamplifier Instructions for use Page 1 of 7
XX
kW Phono
PHONO PREAMPLIFIER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity kW Phono preamplifier.
Used properly and carefully, it should give many years of outstanding musical
reproduction.
Aesthetically, the kW Phono is a perfect match for the
kW 750 Power Amplifier, kW Hybrid Line Level Preamplifier
and kW SACD Player.
Together they form one of the finest hi-fi systems available.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning
or polishing agents - they may harm the surface finish.
If you have any questions about your audio system,
please consult your dealer who is there to help and advise.

Musical Fidelity kW Phono Specifications

General

Brand	Musical Fidelity
Model	kW Phono
Category	Amplifier
Language	English

Summary

Instructions for Use

Safety Information

Important UK Mains Plug Information

Important safety information regarding the UK mains plug and wiring instructions.

Appliance Earthing Warning

Crucial warning about the necessity of earthing the appliance for user safety.

Modification Warning

Warning that unauthorized modifications void the warranty and user authority.

General Advice

Installation Precautions

Precautions for safe installation and general user information for the preamplifier.

Radio Frequency Interference (R.F.I.)

Information and advice regarding radio frequency interference affecting or emitted by the unit.

Connections and Facilities

Front Panel Overview

Details and numbering of controls and indicators on the front panel of the unit.

Rear Panel Overview

Identifies and describes all input/output sockets and switches on the rear panel.

Connections

Input Connections and Loading

Guidance on connecting pickup cartridges and adjusting MM/MC input impedance.

Pickup Arm Earthing and Output Connections

How to connect pickup arm earthing and the preamplifier's audio outputs.

Operation

Pre-Operation and Starting

Steps before powering on and procedure for starting the unit with status indicators.

RIAA/IEC Compensation and MM/MC Switching

How to adjust compensation curves and switch between MM/MC input stages.

Specifications

Output and Input Specifications

Maximum voltage output, impedance, sensitivity, and frequency response details.

Performance Metrics

Details on THD+N, overload margin, channel separation, balance, and signal-to-noise ratio.

Connectivity, Power, and Physical Details

Information on sockets, power requirements, dimensions, weights, and accessories.