MUTOH Valuevet VJ-1638 User Manual

Explains the various warning symbols and their significance in the manual and on the printer.

Details crucial cautions for safe operation, installation, and environmental considerations.

Describes the types, locations, and proper handling of warning labels on the printer.

Highlights key functionalities like high-speed output, color reproduction, and multi-heater system.

Identifies and describes the names and functions of printer components in front and rear sections.

Explains the different printer statuses (Normal, Setup) and how to change them.

Covers power cord connection, turning the printer ON/OFF, and initial ink filling.

Provides instructions for loading roll media, setting it up, and handling it correctly.

Details standard and custom methods for adjusting print quality for optimal results.

Explains system requirements and steps for connecting the printer to a PC via network.

Outlines the step-by-step procedure for performing printing operations with the printer.

Covers media types, handling cautions, storage, printable area, and head height adjustment.

Explains how to configure printer settings through the operation panel menus.

Describes functions like feeding media, stopping printing, cutting media, and using the spectrophotometer.

Provides a summary of available setup items and their descriptions in the operation panel.

Details how to set user types, print modes, and effects for optimal printing.

Covers media feed compensation, spitting, margins, media detection, and cutting methods.

Explains settings for auto cleaning, ink status, roll length, CR maintenance, initialization, and network configuration.

Guides on how and when to replace ink cartridges, roll media, and flushing-box sponges.

Provides instructions for cleaning the outer case, inside printer parts, print head, and wiper.

Details the timing and correct method for disposing of waste fluids from the printer.

Instructions on how to safely move and reinstall or transport the printer.

Describes common printer issues, their causes, and recommended remedies.

Lists and explains error messages, their display, and the required actions to resolve them.

Addresses issues like media slipping, tearing, crumpling, wrong size, jamming, and veering.

Lists detailed technical specifications of the printer, including dimensions and power requirements.

Describes the network interface type, connector, and corresponding protocol used.

Information on available options and consumable supply items for the printer.