MVE Automation Series User Manual

O"
MVE$Automation $Series$Quick$Reference$Guide
"
!
!
!
Password$and$Security$Setup"
The TEC 3000 can store up to 10 different passwords. Each password can be assigned its own security level ranging
from Level 1 to Level 4. Table 3 below shows which settings can be changed with each security level. A security level
of 4 is required to adjust any password. The default (or “Global”) password for the TEC 3000 is “3456”. All
parameters may be adjusted by using this password. Record all passwords and security settings and store in a safe
place. NOTE: MVE recommends changing the global password, as it is common to all units. If the global password
has been forgotten, contact MVE Customer Service for details on how to reset passwords.
!
!
D/ ?3,"=S""E,)(%!*4" G,H,31"/-'"0,.!-!*!&-1"
!
FEATURE
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
Fill Start
X
X
X
X
Fill Stop
X
X
X
X
Alarm Mute
X
X
X
X
Change Display Units
X
X
X
X
Temp Settings
!
X
X
X
Level Settings
!
X
X
X
T ime/Date
!
X
X
X
Calibration Probes
!
X
X
X
Change Lang uages
!
X
X
X
Hot Gas Bypass Settings
!
X
X
X
OFAF Setting
!
!
X
X
Communication Settings
!
!
X
X
Programming
!
!
X
X
Password Settings
!
!
!
X
!
!
1. PRESS “SETUP”
The controller will prompt for a password. Use the “
▲
/
▼”
keys to scroll to the appropriate number. If setting up
passwords for the first time, use the default password of
“3456”. Press “Enter” to move cursor to the next position in
the password.
!
!
!
2. PRESS “ENTER”
The display will read “Temperature Menus”.
!
!
!
!
3. PRESS “SETUP”
Until the display reads “Password Menus”
!
!
!
!
!
4. PRESS “ENTER”
The display will read “Press Enter to change Global Password
or press Setup for Next”.
Higher Use Level
Required Use ▲ / ▼ To
Enter Password
0000
!
!
!
!
Press Enter For
Temperature Menus
Or Press Setup For
Next Menu
!
!
Press Enter For
Password Menus
Or Press Setup For
Next Menu
!
!
Press Enter To
Change Global
Password Or Press
Setup For Next
!
!
!
NOTE: The default setting for the “Global” password is “3456”. The “Global” password may be used to
change ALL settings for the TEC 3000.

MVE Automation Series Specifications

General

Brand	MVE
Model	Automation Series
Category	Controller
Language	English