What to do if my MW TOOLS MV900IL Fan shows E-OC error?
If your MW TOOLS Fan displays an E-OC error, it indicates overcurrent protection. You should check if the load condition of the blades exceeds the rating. After addressing the issue, rewind the fan.
What does E-IPM mean on my MW TOOLS MV900IL and how to fix it?
The E-IPM error on your MW TOOLS Fan indicates drive high-voltage module protection. Check the heat dissipation of the module and inspect the motor cables for any short circuits.
What does E-OV mean on my MW TOOLS MV900IL Fan?
The E-OV error on your MW TOOLS Fan signifies overvoltage protection. Check the grid voltage to ensure it does not exceed 282 VAC.
What does E-UV mean on my MW TOOLS MV900IL?
The E-UV error on your MW TOOLS Fan indicates undervoltage protection. Verify that the power supply is not below 85 VAC and check if the A power line input is loose.
What to do if MW TOOLS MV900IL shows E-STALL error?
If your MW TOOLS Fan displays an E-STALL error, it means the fan is blocked. Check the motor, remove the obstruction, and then restore the power.
Why MW TOOLS MV900IL trips directly when pressing the Run key?
When the MW TOOLS Fan trips directly when pressing the Run key, it indicates a motor short circuit or power module internal failure. Please contact your dealer.
To Next Page
General