EasyManua.ls Logo

MW TOOLS MV900IL - Safety Instructions

MW TOOLS MV900IL
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
EN
M1.1.MV900-1500-2000IL.NLFREN - 09122019
1 Safety instructions
Read this manual carefully before using the unit. Installation and maintenance of this fan must be carried out by qualied
personnel.
In the process of transportation and installation, be careful to protect the unit and avoid causing unnecessary damage.
When operating the controller, follow the static action procedure. Otherwise, the internal loop of the controller will be
damaged by static electricity.
Do not allow children to touch when running or stopping.
In order to illustrate details of the product, it is sometimes presented in this manual with the protective covers removed.
When using the unit, make sure that the protective covers and other safety devices are properly installed in accordance
with the instructions.
The instructions may be modied at any time and without notice, due to possible changes and improvements to the product.
Please contact your dealer for a user manual if yours is damaged or lost.
Comply with all safety instructions in this manual to avoid material damage or serious or even fatal injuries. The
manufacturer is not responsible for any accident due to failure to comply with the safety instructions or operating instructions
contained in this manual.
To prevent electrical shocks:
> Unqualied persons are not authorized to carry out maintenance, inspection or replacement of parts.
> Always disconnect the unit before carrying out any checks or maintenance work.
Safety measures for industrial ceiling fans:
> A fan can suddenly turn on if it is powered on, causing a risk of serious injury or death.
> Before turning on the fan, make sure that no one touches the inside of the fan.
> Before turning on the fan, make sure that the blades cannot reach any persons or objects during their rotation.
> Never remove the protective covers from the control panel or keypad when the unit is powered on, to avoid the risk of
electric shock.
> Fire hazard: Before connecting the appliance, check that the characteristics of your power supply correspond to the
technical data of the appliance, particularly with regard to voltage. If the power supply is not adequate, there is a risk
of damage to the unit and a risk of re.
Important! The components of the wooden packaging (wooden crate, plywood, pallet) used for transport must be
disinfected. They must be disinfected and dewormed by fumigation.
2 Operating limits and specications
2.1 Operating limits
The company does not bear the responsibility for improper use and the use of the product in excess of the prescribed
scope.
The unit must not be used in unstable areas, such as high frequency vibration areas and long periods of turbulence.
The unit must not be operated in bad conditions, such as freezing, corrosion, explosion and dust concentration.
2.2 Specications
Model Voltage Power Maximum speed Diameter Air ow Net weight
MV900IL 230 V 500 W 700 rpm 900 mm 382 m³/min 54 kg
MV1500IL 230 V 750 W 360 rpm 1500 mm 954 m³/min 85 kg
MV2000IL 230 V 950 W 260 rpm 2000 mm 1508 m³/min 133 kg
Copyrighted document - All rights reserved by FBC