MX HEALTH MX86005 - SETUP AND OPERATING PROCEDURES; BATTERY LOADING; CLOCK AND DATE ADJUSTMENT

10
11
SETUP AND OPERATING PROCEDURES
BATTERY LOADING
a. Openbaerycoveratthebackofthemonitor.
b. Loadfour“AAA”sizebaeries.Pleasepayaenontopolarity.
c. Closethebaerycover.
• Whenthescreenshowsthebaerysymbolreplaceall
baerieswithnewones.
• Rechargeablebaeriesarenotsuitableforthismonitor.
• Removethebaeriesifthemonitorwillnotbeusedfora
monthormoretoavoidrelevantdamageofbaeryleakage.
• Avoidthebaeryuidgengintoyoureyes.Ifitshouldget
inyoureyes,immediatelyrinsewithplentyofcleanwaterand
contactaphysician.
Thenegaveterminalofthebaeryneedstobecompressedinto
thebaerycompartmentproperlyaerhorizontalcompression
ofthenegaveelectrode.Thebaeryisincontactwiththespring
Makesurethebaerycoverisintactandnotdamagedbefore
installingthebaery
The monitor, the baeries and the cu, must be disposed of
according to local regulaons at the end of their usage.
2. CLOCK AND DATE ADJUSTMENT
a. Onceyouinsertthebaery,theBloodPressureMonitorwillenter
 ClockandDateAdjustmentMode.
b. Ifthemeofthedeviceisalreadysetandneedstobechanged,
 adjustmentcanbereachedbypressingthe“START/STOP”buonfor
 3secondsinStandbyMode.
c. InClockandDateAdjustmentMode,themeformatwillblinkat
 rst,Pressthebuon“MEM”canchangemeformat.Pressthe
 buon“START”repeatedly,theyear,month,day,hourandminute
 willblinkinturn(seepicture2-2&2-3&2-4&2-5&2-6).Whilethe
 numberisblinking,pressthebuon“MEM”toincreasethenumber.
 Keeponpressingthebuon"MEM",thenumberwillincrease
 rapidly.
MX86005 - IFU - 11.2020.indd 10MX86005 - IFU - 11.2020.indd 10 2020/12/14 16:372020/12/14 16:37