- 25 -
desired range, simply turn the Boundary
Control Switch Knob clockwise to increase the
Boundary Width or counterclockwise to
decrease the Boundary Width. Repeat this
activity as needed until the Receiver Collar
beeps at the desired distance from the
Boundary wire.
The Receiver Collar beeps as a warning tone
and ticks when delivering a vibration. After
hearing the beeps, continue walking toward
the Boundary Wire. The Receiver Collar will
then emit a static shock, indicating you’ve
entered the Correction Zone. The Receiver
Collar has one vibration and 3 levels of static
correction without the Remote Trainer.
Important: When your pet is walking close to the
Boundary Wire, they will first receive a warning
beep, then a vibration warning, and finally a
static shock. The shock level will increase
automatically from 1 to 3.
To Next Page
Loading...