- 27 -
being careful not to damage the Boundary
Wire.
If you decide not to bury the wire, there are
other options for setting your pet area. The
Boundary Wire can be carefully attached to a
chain link fences, spilt rail fences, or even
wooden privacy fences. The Boundary Wire
can be attached as high as needed; however,
make sure the Boundary Width is set at a high
enough range for the pet to receive the signal.
The Boundary Wire can also be placed above
the ground inside a plastic conduit for
protection.
Important: If attaching the boundary Wire to an
existing fence the fence cannot be made of solid
metal sheeting as this will interfere with the
signal emitted from the transmitter box.
VII. Place the Boundary Flags:
To Next Page
Loading...