2200LZJE-HO-C6-N_2013.12.
Chapter 3 Installation
Compound 2-stage Screw Compressor 2016**C 3.2 Installation Works
3-7
Be sure to conduct the initial charge of lubricant in such a way that the oil cooler and oil filter are
filled with lubricant.
For details about lubricant to be used, see "4.1 Lubricant (Refrigerant Oil)" in this manual.
For the specified amount of initial charge of lubricant, refer to the instruction manual of the unit.
3.2.7.2 Additional Charge of Lubricant
For additional charge of lubricant during operation the procedures of charging defer depending on the
systems and operating conditions therefore follow the procedures described in the instruction manual
of the unit.
3.2.8 Charge of Refrigerant
Charge refrigerant by referring to the instruction manual of the unit.
3.2.9 Check after Installation
Check the compressor after installation according to the check items of the unit.
To Next Page
Loading...
Need help?
General
