MYPV AC-THOR - 1 Assembly; 2 Commissioning; Putting Back into Service

AC•THOR
®
/ AC•THOR
®
9s Operating instructions, version a0020000 3
Connect Web-Interface ........................................................................................................ 29
Home (homepage) .............................................................................................................. 30
Data logger ......................................................................................................................... 30
Status information ............................................................................................................... 31
Settings .............................................................................................................................. 32
Special setting possibilities in the Web-Interface ................................................................... 32
Legionella boost outputs (only with AC•THOR 9s) .............................................................. 32
Control Settings ............................................................................................................... 33
Measurement Settings ...................................................................................................... 36
E-Car-Function ................................................................................................................. 36
Multi units ....................................................................................................................... 36
Cloud Mode ..................................................................................................................... 38
Debug-Mode .................................................................................................................... 40
Help ................................................................................................................................... 40
7. Potential-free input for external control ................................................................................ 40
8. Description of the protocols for http and Modbus TCP ........................................................... 41
9. Firmware update ................................................................................................................. 41
Update of server ................................................................................................................. 41
Manual Update ................................................................................................................ 41
Update with SD card............................................................................................................ 42
10. Status codes ....................................................................................................................... 42
11. Temperature sensors: Assignment and function (only with AC•THOR 9s) ................................ 42
12. Fault temperature sensors ................................................................................................... 42
13. Error messages on the Display ............................................................................................. 43
14. Fault signals by the AC•THOR Logo ...................................................................................... 43
1. Assembly
Before placing into operation it is essential to read the assembly instructions provided with the
device.
2. Commissioning; putting back into service
This takes just a few moves and is performed the first time the AC•THOR is operated or when it has
been reset to factory settings.
1. Select language
Use the cursor keys on the left and right to view further possibilities.
2. Select operating mode
See chapter headed "Operating modes".
3. Select control of the signal source for the AC•THOR
a. Power meter automatic: Connection to my-PV power meter in the network is set up
automatically.
NOTE: setting up the connection may take up to a minute.
b. Power meter manual: Connection to my-PV power meter in the network is set up by
entering the IP address manually.