MYPV AC-THOR - Status Symbol

AC•THOR
®
/ AC•THOR
®
9s Operating instructions, version a0020000 5
Homescreen AC•THOR:
Presentation
according to operating
mode
Date, Device number
time Operating mode Status
Main menu
Single-Boost
Homescreen AC•THOR 9s:
With the AC•THOR 9s,
the power display
consists of three bars.
Load output Out-3
Load output Out-2
Load output Out-1
If several temperature
sensors are used, the
sensor number is
displayed.
The button "Single boost" only appears in hot water operating modes if the function for
ensuring a minimum temperature is activated. Actuating the button starts a once-only
boost backup mode. This can also be deactivated while it is in operation.
If the boost backup is actuated automatically based on the day of the week, time of day or
temperature, it cannot be deactivated by using the button.
Status symbol
Lights up = set temperature reached, Flashes = stand-by, waits for excess
Lights up = heats with PV excess. Flashes = boost backup mode
Lights up = no control signal
Lights up = physical connection to the RJ45 network connection is intact
Lights up = no intact physical connection to the RJ45 network connection
Block active