System setting
6. System setting
Press [SETUP]. The screen will display the system
setting menu. To navigate the menu, use [ ] / [ ]
the buttons. To confirm your selection, press [ENTER].
In the sub-menus, use the [ ] / [ ] buttons to
make your selection, press [ENTER] to enter the item
to be changed. To navigate up and down use the [ ]
/ [ ] buttons. Highlight your selection and press
[ENTER] as conformation.
Press [ ] to escape the sub-menu and make another
selection, or press [SETUP] to exit the SETUP menu.
Provided below examples of settings and the
instructions on changing common settings:
Example 1: Set TV screen ratio mode
Press [SETUP] to enter the menu. Press [ENTER] to
make your selection. Use [ ] / [ ] to navigate to
TV display. Press [ENTER] to select.
Press [ ] to enter sub-menu on the right. To change
the screen settings, use [ ] to navigate to your
selection, highlight your selection and press [ENTER].
-13-
To Next Page
Loading...
Need help?
General