Functions of buttons in remote control
7. Functions of buttons in remote control
This chapter will explain in detail the functions and operation procedures of all buttons in the remote control,
for user’s instant reference. Most operation procedures can be referred to relevant content of chapter 4,5.
7.1. [
When the DVD player is in stop, pause, slow play, fast forward, fast reverse state, you can push [
II
] to
resume normal playback. Push [
II
] again, the DVD player will be pause, push [
II
] again, it will play.
7.2. [TITLE] (whether if works depends on the type of disc)
Push [TITLE] to display the title menu included in DVD disc. In the menu or the sub-menu picture, you can
push [ ] / [ ] / [ ] / [ ] to move the cursor to define desired item, then push [ENTER] to select the
part to be played.
7.3. [PROGRAM]
Whether if works depends on the type of disc, push [PROGRAM] to enable users to change the playing order.
7.4. [
]
Push the button once, the tray will be ejected, press it again to close the tray. When you want to load or unload
disc, you can use this button.
7.5. [REPEAT]
Push this button to repeat chapter, title & disc.
7.6. [ZOOM]
While playing a disc, use [ZOOM] to zoom in or out of the image. This function has six levels: 3X increasing,
and 3X decreasing. The zoom function operates with each press of the button X2, X3, X4 then 1/2, 1/3, 1/4,
then returning to normal size on the seventh pressing of the button.
-16-
II
]
To Next Page
Loading...
Need help?
General