SDM108 20
ā For Android device:
1. Switch INPUT SOURCE to SPSC.
2. Using the SPSC cable Connection between MHL adaptor and the SPSC port of SDM108.
3. Connect the adaptor cable on micro USB side to a smart phone.
4. Connect the USB connector of adaptor cable to USB port of SDM108.
The USB supports 1A for charging.
MHL support depends on the smart phone and also on the MHL, SPSC cable.
If you want to know which smart phone supports MHL function, you can to refer the web site under.
http://www.mhlconsortium.org/productlist/mobile-devices/ .
To Next Page
Loading...
Need help?
General
