Mytek Manhattan Digital to Analog Converter – User's Manual
Specifications
• Conversion: 32bit PCM up to 384k, DXD, DSD-DS-DSD256 (11.2 MHz)
• Dynamic Range: 130dB (ESS Sabre chipset in 8 mono to 2 stereo config.)
• Femtoclock Internal Clock Generator (lps jitter.) Wordclock In and Out, or sync to incoming digital
audio input with JET (tm) PLL. Time Domain Jitter Eliminator
• Headphone Amp: High Current, High Slew Rate ultra low distortion 1600mA Hi-Fi dual mono design,
0.25 Ohm impedance with gain selector switch
• Computer Audio Inputs and Outputs: Firewire 400/800 up to PCM 192k/DSD async, USB2.0 up to
384k/DSD256, USB 1.1 up to PCM 96k, driver-less. DSD DOP256 SDIF DSD input, optional SACD
optical input ***
• Digital Audio Inputs: SPDIF, AES/EBU, Toslink all up to 192k single wire. DSD-DSD256 SDIF DSD
input, optional SACD optical input ***
• Internal Hardware Upsampling to DSD256: Any digital signal can be upsampled to DSD256 for
superior DAC chipset performance*
• Internal PCM Hardware Upsampling: 16bit 44.1k etc. can be optionally upsampled prior to
conversion to 192k/24bit.
• Analog Attenuator: Transparent, 1dB stepped programmable, separate for main out and
headphones. Or 32 bit digital attenuator or relay bypass of the attenuator can be chosen by user
• Analog Inputs: 2 Unbalanced RCA, 1 Balanced XLR
• Linear Power Supplies, Separate: Oversized 50VA analog, 50VA digital, Worldwide
• Firmware updates: online, user downloadable, periodic feature upgrades
• Ability of converting standard digital audio inputs into computer FW/Thunderbolt input
• Apple aluminum remote (included) and universal remote capable
Special hardware options
• EMM Labs, Playback Design compatible optical SACD digital input board ***
• Ultra high preformance MM, MC phono preamplifier board ****
* DSD256 upsampling available in Q4/2014 via firmware update
** 115/230V 50/60 worlwide model, or 100V/230V Japanese model
(available only in Japan)
*** Available Q4/2014
**** Available Q1/2015
www.mytekdigital.com Page: 23/25
To Next Page
