N-Com B5 User Manual

B5
15
10. RIDER-PASSENGER INTERCOM
10.1. Rider-Passenger intercom pairing up
 Make sure the B5 is turned off;
 Put both systems in Setting mode (press the “on” key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly);
 Press the “n” key briefly on one of the systems (Channel 1 pairing up);
 A “wait for connection” tone is emitted until the pair up procedure is not completed.
10.2. Rider-Passenger intercom function
After carrying out the proper pair up procedure, turn on the two helmets. To activate the intercom
connection, starting from an N-Com system that has already been turned on, briefly press key "n".
Manual intercom connection With B5 turned on, briefly press “n”.
Manual intercom disconnection With B5 turned on, briefly press “n”.

N-Com B5 Specifications

General

Brand	N-Com
Model	B5
Category	Automobile Accessories
Language	English