15
Conference call function
Bluetooth Kit3 allows a conference call with Rider and Pillion Passenger.
When a call comes in on a mobile phone connected via Bluetooth to Bluetooth Kit3,
the Rider-Pillion Passenger intercom is temporarily turned off. However, if you wish to
share the phone call with the other helmet, simply turn on the intercom manually
during the phone call (by briefly pressing “on”).
Caution: this function is available only if the Pillion Passenger helmet is also equipped
with a N-Com system provided with the same function.
7. GPS SATELLITE NAVIGATOR FUNCTIONS
Bluetooth Kit3 is compatible with the most common satellite navigators for
motorcycles. By connecting the N-Com system to the GPS, all instructions will be
transferred to the helmet.
Every time the navigator communicates instructions, the intercom via Bluetooth with
the Pillion Passenger is cut off and automatically restored at the end of the
communication.
Note: If the navigator is pre-set for connection to a Bluetooth mobile phone, you will
be able to receive the phone call audio directly in the helmet through the GPS. In
this case, you can answer the call directly from the navigator.
GPS Conference Call Function
The Conference function allows you to keep the “Rider-Pillion Passenger” intercom
open even while the satellite navigator is giving instructions, thus preventing the
intercom mode to be turned off every time the navigator gives instructions.
Caution: this function is available only if the Pillion Passenger helmet is also equipped
with a N-Com system provided with the same function.
At the end of the GPS communication, the intercom with the second helmet stays
open and the "Conference" setting is stored for future GPS communications.
To Next Page
Loading...
Need help?
General