21
12.3. Taking a Bike-to-Bike call
Four calling tones will sound in the helmet receiving the Bike-to-Bike call, and all open
audio functions will be temporarily cut off (including the Rider – Pillion Passenger
intercom, if any). The call can be answered by briefly pressing any key when you hear
the ringtone signal.
In case you take the call, communication is automatically established. In case the call
is not answered, the system returns to the situation prior to receiving the call.
N.B.: you can cut off Bike-to-Bike communication from anywhere in the menu by
briefly pressing “on”.
Bike-to-Bike intercom communication differs from the Rider-Pillion Passenger kind for
certain specific characteristics:
The audio coming from an external source (connected via cable or Bluetooth) IS
NOT shared with the helmet connected in Bike-to-Bike Intercom mode.
The audio coming from the radio IS NOT shared with the helmet connected in
Bike-to-Bike Intercom mode.
In case the bike-to-bike intercom mode is on and there is no connection with the
other Rider due to out-of-range distances, the two helmets will be automatically
reconnected as soon as the distance is reduced within a range where
communication is possible. The search for automatic reconnection lasts 2
minutes, at the end of which reconnection must be carried out through the “Bike-
to-Bike Call”.
For additional information, please visit the website www.n-com.it
To Next Page
Loading...
Need help?
General