EasyManuals Logo

N-Tron 1002MC-LX-YY User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
(Revised 2011-09-28)
4
ELECTRICAL SAFETY WARNINGS
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D or non-hazardous locations
only.
This equipment must be used with a Listed UL Industrial Power Supply.
A Recognized or Listed fuse, rated maximum 3A, minimum 30VDC, must be installed on the line side of the
device.
WARNING Explosion Hazard Substitution of components may impair suitability for Class I, Division 2.
WARNING Explosion Hazard Do not disconnect while circuit is live unless area is known to be non-
hazardous.
WARNING Explosion Hazard Do not replace the device unless power has been switched off or the area is
known to be non-hazardous.
Use 110°C or higher rated copper wire, (0.22Nm) 2 lb/in tightening torque for field installed conductors.
WARNING: Do not operate the equipment in the presence of flammable gasses or fumes. Operating
electrical equipment in such an environment constitutes a definite safety hazard.
WARNING: If the equipment is used in the manner not specified by N-TRON Corp., the protection provided
by the equipment may be impaired.
WARNING: Do not perform any services on the unit unless qualified to do so. Do not substitute
unauthorized parts or make unauthorized modifications to the unit.
WARNING: Do not operate the unit with the end plates removed, as this could create a shock or fire
hazard.
WARNING: Properly ground the unit before connecting anything else to the unit. Units not properly grounded
may result in a safety risk and could be hazardous and may void the warranty. See the grounding technique
section of this user manual for proper ways to ground the unit.
WARNING: Do not operate the equipment in a manner not specified by this manual.
WARNING: Do not work on equipment or cables during periods of lightning activity.
WARNING: Observe proper DC Voltage polarity when installing power input cables. Reversing voltage
polarity can cause permanent damage to the unit and void the warranty.
.
WARNING: Install only in accordance with Local & National Codes of Authorities Having Jurisdiction.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the N-Tron 1002MC-LX-YY and is the answer not in the manual?

N-Tron 1002MC-LX-YY Specifications

General IconGeneral
BrandN-Tron
Model1002MC-LX-YY
CategorySwitch
LanguageEnglish

Related product manuals