Need help?Do you have a question about the N-Tron 7506GX2 and is the answer not in the manual?
General| Layer | Layer 2 |
|---|---|
| Switching Capacity | 8.8 Gbps |
| Power Supply | 10-49 VDC |
| Operating Temperature | -40°C to 75°C |
| Mounting | DIN Rail |
| Ports | 6 x Gigabit Ethernet ports (10/100/1000BaseTX), 2 x Gigabit Ethernet fiber ports (1000BaseSX/LX) |
| Weight | 1.8 lb (0.82 kg) |
General safety precautions for using the equipment.
Safety guidelines specific to laser components.
Precautions related to environmental conditions.
Safety measures for electrical connections and operation.
Guidelines for installing the equipment in hazardous environments.
Guide for mounting the switch on a standard 35mm DIN rail.
Steps and guidelines for connecting power to the switch.
Steps for connecting network cables to the switch ports.
Methods for properly grounding the switch for safety and performance.
Connecting and configuring the USB interface for management.
Accessing and navigating the switch's web-based management interface.
Configuring IP, MAC, Name, Contact, Location, and Temperature thresholds.
Creating and managing network profiles for DHCP server functionality.
Mapping IP addresses to devices using dynamic, static, or single IP methods.
Enabling/disabling LLDP, setting transmit intervals, and delays.
Detailed settings for each port, including speed, duplex, QoS, and VLAN.
Configuring port security to learn or lock MAC addresses.
Setting up VLANs, including replacing tags, ingress filtering, and discarding non-tagged.
Configuring Rapid Spanning Tree Protocol parameters for VLANs.
Enabling IGMP, setting query modes, router modes, and manual ports.
Setting N-Ring mode, aging time, and participating ports.
Setting up N-Link for redundant coupling of network topologies.
To Next Page
