N-Tron 710FX2 - User Manual

710FX2
Managed Industrial
Ethernet Switch
User Manual &
Installation
Guide

N-Tron 710FX2 Specifications

General

Brand	N-Tron
Model	710FX2
Category	Switch
Language	English

Summary

Safety, Installation, and Basic Setup

Safety Warnings and Precautions

Covers general, laser, environmental, and electrical safety guidelines.

Installation and Setup Procedures

Procedures for unpacking, mounting, connecting, and grounding the switch.

USB Interface and CLI Access

Connecting via USB and using HyperTerminal for command-line interface.

Switch Features Overview

Advanced Port Operations

Port modes, mirroring, trunking, and Quality of Service (QoS).

Network Protocols and Features

VLANs, RSTP, IGMP, N-Ring, N-Link, CIP, DHCP, LLDP, and Port Security.

Management and Configuration

Web Management Interface

Accessing and navigating the switch's web interface.

Administration and Protocol Settings

System, SNMP, Fault, DHCP, Ports, Bridging, VLAN, RSTP, IGMP, N-Ring, N-Link, CIP, Firmware, Rate Limiting, User Management config.

Statistics, Logical View, and Help

Viewing statistics, logical view, help topics, and support information.

Command Line Interface (CLI) and Examples

CLI Command Reference

Overview and syntax for essential CLI commands.

CLI for Configuration Management

Using CLI for ARL, device config, CIP, IGMP, Port, IP, and System settings.

VLAN Configuration Examples

Practical examples for port-based, tagged, hybrid, overlapping, and filtered VLANs.

Specifications and Warranty

Key Technical Specifications

Detailed technical specifications for 710FX2 and 710FX2-HV models.

XML Settings and Warranty Information

Example XML configuration file and product warranty details.