Need help?Do you have a question about the N-Tron 708TX and is the answer not in the manual?
General warnings for safe operation and maintenance of the equipment.
Safety precautions related to laser components, if applicable.
Safety considerations for operating the equipment in various environments.
Safety guidelines related to electrical connections and power supply.
Procedure for mounting the unit vertically on a DIN rail.
Procedure for mounting the unit horizontally on a DIN rail.
Details on connecting the switch's serial port to a PC.
Recommended settings for using HyperTerminal with the switch.
Describes different operational modes for switch ports.
Configuration for mirroring Ethernet frames for monitoring.
Feature to group ports for increased bandwidth and redundancy.
Mechanism for prioritizing network traffic based on application or user.
How the switch obtains IP addresses automatically via DHCP.
Syntax and usage for getting help on CLI commands.
Syntax and usage for logging out of the CLI.
Demonstrates basic configuration of port-based VLANs.
Illustrates basic tagged VLAN configuration allowing only tagged frames.
Demonstrates tagged VLANs allowing both tagged and untagged frames.
Explains the configuration and behavior of hybrid VLANs.
Illustrates how to create overlapping VLAN configurations.
Demonstrates VLANs incorporating multicast filtering.
General| Ports | 8 |
|---|---|
| Layer | 2 |
| Enclosure | Metal |
| Standards Compliance | IEEE 802.3, 802.3u, 802.3x |
| Switching Capacity | 1.6 Gbps |
| Operating Temperature | -40°C to 70°C |
| Mounting | DIN Rail |
| Weight | 0.9 kg |
| Port Type | 10/100BaseTX |
| Power Input | 10-30 VDC |
To Next Page
