N-Tron 7506GX2 User Manual

(Revised 2011-07-21) Page 142 of 158
CLI Commands, Continued…
Show or Clear the Last System Error
Command Name
Syserr
Description
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
Syntax
syserr [clear]
Parameters
Clear
Clear the last system error.
Example
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Notes
Show System Information
Command Name
Sysinfo
Description
Show system information
Syntax
Sysinfo
Parameters
None
Example
N-TRON/Admin> sysinfo
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-TRON 700/7000/7500 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 7506GX2
+ Boot Loader: BL 2.0.5.1 (0x02000501)
+ OS Version: 3.1.4
+ Build Date: Oct 13 2009 at 13:41:12
+ Copyright: Copyright (c) 2008-2009 N-TRON Corp. All rights
reserved.
+
+ Processor: 66 MHz (66000000)
+ SDRAM Size: 16 MB
+ Flash Size: 8 MB
+ File System: 6422528 Bytes, 614400 Free, 5677056 Used,
131072 Bad
+ MAC Address: 00:07:af:fb:a2:c0
+ IP Address: 192.168.2.201
+ Subnet Mask: 255.255.252.0
+ Gateway: 192.168.1.1
+ Cfg Device: SDS128M
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Notes

N-Tron 7506GX2 Specifications

General

Brand	N-Tron
Model	7506GX2
Category	Switch
Language	English