N-Tron 7506GX2 User Manual

(Revised 2011-07-21) Page 144 of 158
CLI Commands, Continued…
Show or Set System Configuration
Command Name
System
Description
Show or set System configuration. If no parameters are specified, this command will
show the System configuration (same as -show parameter).
Syntax
system [-show] [-name label] [-browser state]
Parameters
-show
Show configuration.
-name label
Set the switch name.
-browser state
Set the browser access status to e(nabled) or d(isabled).
Examples
N-TRON/Admin> system –name “Private switch” –browser disabled
IP Configuration : Static
IP Address : 192.168.2.201
Subnet Mask : 255.255.252.0
Gateway : 192.168.1.1
MAC Address : 00:07:af:fb:a2:c0
System Up Time : 0 days, 23 hours, 25 mins, 19 secs
Name : Private switch
Contact : N-TRON Admin
Location : Mobile, AL 36609
Temperature : 24 C, 75 F
Upper Threshold : 80 C, 176 F
Lower Threshold : -40 C, -40 F
Browser Access : Disabled
Changes have been made that have not been saved.
…
NOTES
A switch name may only contain alphanumeric, space, ‗:‘, ‗-‗, ‗_‘, and ‗#‘ characters, and
may not begin with a number, space, or underscore. A name with embedded space
characters must be enclosed in quotes.

N-Tron 7506GX2 Specifications

General

Brand	N-Tron
Model	7506GX2
Category	Switch
Language	English