N-Tron 7506GX2 - Configuration Device Operations

(Revised 2011-07-21) Page 134 of 158
CLI Commands, Continued…
Configuration Device Operations
Command Name
cfgdev
Description
Info, Format, Compare and Erase Configuration Device.
Syntax
CfgDev info | format [-m model] | compare | erase
Parameters
Info
Show information about the configuration device.
Format
Format the configuration device to factory default.
-m model
Configuration device model number. Valid values are:
1=At32K, 2=At64K, and 3=card.
Compare
Compare the configuration of the switch to the configuration device.
Erase
Erase the switch configuration on the configuration device.
Example
N-TRON/Factory> cfgdev info
Port A: 0xd080
Board ID: 0x0005 (5)
Configuration device information:
Name : SDS128M
Model : 3
Version : 1
Page Size : 200
Total Size : 127008768
Max Clock (Hz) : 400000
Write Cycles (ns): 5000000
Flags : 0x00000001
N-TRON/Factory> cfgdev compare
Comparing switch configuration to the configuration device...
The configurations are different.
N-TRON/Factory> cfgdev compare
Comparing switch configuration to the configuration device...
The configurations are identical.
N-TRON/Factory> cfgdev format
Formatting configuration device...
Configuration device format completed.
N-TRON/Factory> cfgdev erase
Erasing configuration device...
Configuration device erase completed.
Notes