Need help?Do you have a question about the Nacon RIG 700 Series and is the answer not in the manual?
Connect adapter to system, power on PS4, and check for updates. Adjust system audio settings via console user guide.
Connect adapter to system, set switch to console/PC preference. Power on Xbox One and check for updates.
Connect adapter to system. Note: Optical cable is for RIG 700HD/HS. RIG 700HX requires switch set to PC.
Headset takes 2 hours to fully charge. LED turns off upon completion. Ensure headset is charged before first use.
Press and hold the Power button for 2 seconds. An audio cue will confirm power on or power off.
Use the top headset dial for game/chat volume. Use the bottom headset dial for master volume adjustment.
Tap the Mute button on the headset to toggle microphone mute on or off.
Press and hold Mute button to cycle mic monitoring levels. Hear your own voice in the headset.
General| Connectivity | Wireless |
|---|---|
| Connection | USB |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Microphone | Yes |
| Impedance | 32 Ohms |
| Microphone Frequency Response | 100 Hz - 10 kHz |
| Type | Over-ear |
| Compatibility | PC, Playstation, Xbox |
| Wireless Range | 10 m |
To Next Page
