NAD 1700 - AM Section Performance; Usable Sensitivity; Selectivity and Rejection; Physical Specifications

AM SECTION
Usable sensitivity
Selectivity
Image rejection
|.F. rejection
S/N ratio
THD
PHYSICAL SPECIFICATIONS
Width x Height x Depth
Net Weight
Shipping Weight
Power Requirement
300 uV/meter
35 dB
50 dB
50 dB
45 dB (30% mod., 50 mV input)
0.5%
43.5 x 12 x 29.3 cm
(17.1 x 4.75 x 11.5 in.)
6.6 kg (14.5 Ibs)
7.6 kg (16.7 Ibs)
50/60 Hz at 110, 120.
220 or 240 VAC 30 W
NOTE : NAD reserves the right to change specifications or designs at any
time without notice. All specifications are those in effect at the time of
printing.
SERVICE SAFETY PRECAUTIONS (UL)
1. Use exact replacement parts for critical locations, marked “A” on parts list.
2. Return lead dress to original position, and re-install protective covers.
3. Before returning to customer, test for shock hazard; use either method A or B:
A. Leakage test, “cold”:
1. Unplug AC cord, turn power switch ON.
2. Connect one lead of High Voltage Insulation Tester to both prongs of AC plug.
3. Touch other lead to all exposed metal parts.
4. Impedance measurement must be 0.3 - 5.0 Megohms.
B. Leakage test, “live”: ;
1. Plug unit directly into AC outlet; do not use isolation transformer.
2. Connect one lead of Leakage Current Tester to earth ground.
3. Touch other lead to all exposed metal parts.
4. Leakage measurement must be less than 0.5 milliamps.