Need help?Do you have a question about the NAD 522 and is the answer not in the manual?
Audio Specifications| frequency response | 5Hz-20kHz ±0.5dB |
|---|---|
| THD (at 0dB, 1kHz) | 0.0025% |
| dynamic range | 96dB |
| signal to noise ratio, A-weighted, de-emphasis on | 100dB |
| signal to noise ratio, A-weighted, de-emphasis off | 110dB |
| channel separation @ 1kHz | >110dB |
| channel separation @ 10kHz | >80dB |
Physical Specifications| dimensions | 435 x 70 x 285 mm |
|---|---|
| net weight | 4.1kg |
| shipping weight | 4.9kg |
Output Specifications| output impedance | 120 |
|---|---|
| output level @ 0dB | 2.2V rms. |
| digital error correction | CIRC with double error correction in C1 and C2 |
Connect stereo audio cable from player's Line Output jacks to amplifier's CD inputs.
Connect the power cord to an AC mains wall outlet or amplifier convenience outlet.
Press the green button to switch the player's power on or off.
Press the OPEN button to open the disc drawer for disc insertion.
Provides information about playback status and laser pickup location on the disc.
Alternates between starting and stopping playback; pauses temporarily.
Stops play, cancels repeat cycle, and resets pickup to disc beginning.
Engages endless-repeat cycle for a single track or the entire disc.
Plays all tracks on the CD in a random order.
Scans backward through the recording at high speed during play or pause.
Scans rapidly forward through the music during play.
Jumps backward to the beginning of numbered tracks on the disc.
Jumps forward to the beginning of the next track and resumes play.
Install the CD player on a level, vibration-free surface, ensuring adequate ventilation.
Connect player to amplifier, plug in power, press power, open drawer, place CD, press play.
Operate playback functions from a distance with a clear line-of-sight path.
Direct-entry keypad for jumping to specific track numbers.
Requires two 1.5-volt AAA cells; open compartment, install cells, and close cover.
Periodically wipe the disc drawer with a damp cloth to remove dust.
Handle discs by edges, avoid scratches and fingerprints for optimal playback.
Clean with soft cloth, use radial strokes; avoid chemical solvents.
Uses a solid-state semiconductor diode laser for disc playback.
Player is safe for children; laser operates at low power and is concealed.
To Next Page
