Need help?Do you have a question about the NAD C 538 and is the answer not in the manual?
General| Built-in speaker(s) | No |
|---|---|
| CD-R playback | Yes |
| Playback disc formats | CD audio |
| CD changer | - |
| Device type | HiFi CD player |
| Product color | Graphite |
| Playback modes | Program, Random, Repeat |
| Number of decks | 1 deck(s) |
| Playback disc types | CD-R, CD-RW |
| Quantity | 1 |
| Frequency range | 20 - 20000 Hz |
| Audio formats supported | MP3, WMA |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| Display type | VFD |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 7.5 W |
| Package weight | 4300 g |
Weight and Dimensions| Depth | 249 mm |
|---|---|
| Width | 435 mm |
| Height | 70 mm |
| Weight | 3000 g |
Safety rules for operation, cleaning, ventilation, and avoiding hazards.
Alerts regarding electrical shock, laser radiation, and radio frequency interference.
Guidelines for proper disposal of waste batteries and electronic equipment.
Compliance with radio noise regulations and recording product identification.
Details of items included in the package and advice on saving packaging for transport.
Recommendations for optimal placement, ventilation, and vibration-free installation.
Step-by-step instructions for initial setup and playing a CD quickly.
Description of the standby button and LED indicator for power status.
Information on the disc tray operation and the Vacuum Fluorescent Display.
Explanation of buttons for playback, stopping, display modes, disc access, and track skipping.
Details about the IR sensor and its optimal operating distance and angle.
Connecting digital audio output to receivers, amplifiers, or computers.
Connecting analog line level outputs to audio input sources.
Instructions for connecting the supplied power cord to the AC mains input.
Functions for turning the unit on/off and setting playback modes.
Controls for play, pause, stop, skip, scan, and track selection.
Direct track access, programming, display dimming, and delete functions.
Guidance on playing various disc formats, including MP3/WMA files.
Instructions for creating and managing custom track playback programs.
How to enable or disable the automatic standby mode.
Using the remote control for playback and navigating features.
Setting up random playback and navigating tracks using index points.
Using repeat modes for single tracks, folders, entire discs, or custom sequences.
Technical specifications for output level, frequency response, distortion, and noise.
Physical dimensions and weight of the unit, including shipping details.
To Next Page
