NAD C520 Specification Sheet

SPECIFICATIONS - NAD C520
Disc capacity Single disc 120mm or 80mm
Digital-to-Analog conversion S - D, 20 bit resolution
Digital filter 8 x oversampled
Analog filter 4 pole active
Frequency response 5Hz-20kHz 0.5dB
De-emphasis error 0.5dB
THD (at 0dB, 1kHz) 0.0035%
Dynamic rang 96dB
Linearity +/- 0.5dB; 0 to -90dB
Signal to noise ratio, A-weighted 108dB
Channel separation @ 1kHz 110dB
@ 10kHz 80dB
Wow and Flutter Unmeasurable (Quartz accuracy)
Output impedance 300ohm
Output level @ 0dB 2.2V rms.
Digital error correction CIRC, double error correction in C1 and C2
Remote control yes
Physical Specifications
Dimensions (W x H x D) 435 x 70 x 285mm 17 1/8" x 2 7/8" x 11 1/4"
Net weight 4.1kg 9.0 lbs
Shipping weight 4.9kg 10.8 lbs
MASH is a registered trademark of Matsushita Laboratories Ltd. Burr-Brown is a registered trademark of the Burr-Brown corporation.
NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.
Printed in Canada.

NAD C520 Specifications

Audio Specifications

frequency response	5Hz-20kHz 0.5dB
de-emphasis error	0.5dB
THD at 0dB, 1kHz	0.0035%
dynamic range	96dB
linearity	+/- 0.5dB; 0 to -90dB
signal to noise ratio, A-weighted	108dB
channel separation at 1kHz	110dB
channel separation at 10kHz	80dB
output impedance	300ohm
output level at 0dB	2.2V rms

Physical Specifications

dimensions	435 x 70 x 285mm
dimensions (inches)	17 1/8" x 2 7/8" x 11 1/4"
net weight	4.1kg
net weight (lbs)	9.0 lbs
shipping weight	4.9kg
shipping weight (lbs)	10.8 lbs