To Next PageTo Next Page
Need help?Do you have a question about the NAD M3 - MANUAL 2 and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| Damping Factor | >150 |
| Power Output | 180W per channel into 8Ω |
| Weight | 18.1 kg (40 lbs) |
Details safety and operating instructions from point 1 to 11.
Details safety guidelines from point 12 through 22, including grounding and damage.
Includes electrical warnings, UK customer advice, environmental considerations, and model number recording.
Details NAD's concept, analog circuit design, digital control, styling, and performance features.
Lists package contents, advises on saving packaging, and provides initial setup steps.
Describes buttons, display (VFD), and rotary controls on the amplifier's front panel.
Details all input/output jacks, power socket, and communication ports on the rear.
Explains the functions of the M3 and ZR3 remote controls and their buttons.
Explains how to connect various audio sources and outputs to the rear panel.
Guides on connecting speakers, wiring types, and configuring the biamp crossover settings.
Details IR control, +12V trigger, RS-232 interface, power switch, and IEC power connection.
Explains how to operate the amplifier functions using the M3 remote control.
Details the operation of the ZR3 remote for second zone output and source selection.
Provides solutions for common problems like no sound, channel issues, remote failure, and protection modes.
Lists detailed technical data for all sections of the amplifier, including performance metrics.
A table for recording original and custom labels for input sources.
