Do you have a question about the NAD M66 and is the answer not in the manual?
Type | BluOS Streaming DAC/Preamplifier |
---|---|
Signal-to-Noise Ratio | >120dB (A-weighted) |
Streaming | BluOS |
MQA Decoding | Yes |
Dirac Live | Yes |
Outputs | 2x XLR, 2x RCA, 1x 6.35mm Headphone |
Wireless | Wi-Fi, Bluetooth |
Ethernet | Gigabit Ethernet |
USB | 1 x USB-A, 1 x USB-B |
Control | BluOS App, IR Remote |
Power Output | N/A (Preamp) |
Total Harmonic Distortion | <0.0005% (20Hz-20kHz) |
Inputs | 1 x MM Phono |
Frequency Response | 20Hz-20kHz (±0.1dB) |
Comprehensive list of safety and operating instructions for product use.
Ensures proper airflow and safe positioning of the audio equipment.
Details equipment compliance with FCC rules for digital devices.
Guidelines for responsible disposal of electronic waste and batteries.
Technical specifications for Bluetooth and Wi-Fi frequency bands and power.
Lists all components included with the M66 unit.
Instructions for restoring the M66 to its default factory settings.
Step-by-step instructions for initial setup and network connection.
Guide for connecting the M66 to a network using an Ethernet cable.
Setup using iOS device's WAC feature and BluOS App.
Steps to connect M66 wirelessly using an Android device and BluOS App.
Manual configuration steps for connecting M66 to a wireless network.
Controls power state, switching between operating and standby modes.
Indicator light status codes and their meanings.
Connection for listening with headphones, mutes other outputs.
Touchscreen display for information and control of functions.
Adjusts the audio output loudness for speakers or headphones.
Ports for servicing and a tact switch for factory reset functions.
Connects to TVs for audio return channel functionality.
Terminals for attaching Bluetooth and Wi-Fi antennas.
Ports for wired network connection and USB drive access.
Optical and coaxial digital audio inputs for connecting various sources.
AES/EBU digital input and various analog line and balanced inputs.
Single-ended and balanced outputs for connecting subwoofers.
RS232, IR IN, and +12V Trigger ports for system integration.
Inputs for Moving Coil and Moving Magnet phono cartridges, plus ground terminal.
Balanced and single-ended analog audio outputs for connecting to amplifiers.
Main power input and switch, and fuse holder information.
Detailed description of the SRM 1 remote control and its functions.
Terminal for grounding and connection point for the mains power cord.
Guide to navigating and using the M66's interactive front panel display.
Selecting and configuring audio sources and managing presets.
Configuration options for player, network, and system settings.
Customizing the M66's name and adjusting Bass/Treble settings.
Configuring subwoofer outputs and crossover frequency.
Digital Dynamic Headroom, LCD/Indicator Brightness, Volume Limits.
Dark Mode, Amplifier Standby, Bluetooth settings, LCD temporary display.
Configuring and customizing audio input sources, names, and icons.
Options for customizing the front display layout and content.
Enabling MQA decoding and synchronizing audio with video sources.
Managing and scanning the music library for BluOS.
Restarting the M66 unit and restoring factory default settings.
Initiating firmware upgrades and viewing system status.
Steps to pair Bluetooth headphones or speakers with the M66.
Details MQA decoding and rendering capabilities for high-quality audio.
Information on room correction technology for optimized audio performance.
Tips for downloading the BluOS app and exploring features.
Specifications for line-in and single-ended analog audio outputs.
Specifications for balanced inputs and outputs.
Specs for digital inputs to single-ended and balanced analog outputs.
Specifications for line-in and balanced subwoofer outputs.
Specifications for phono inputs with analog bypass.
Supported audio file formats and connectivity details.
Front panel, remote control, mobile app, and supported services.
Physical dimensions and weight of the M66 unit.