Need help?Do you have a question about the NAD M12 and is the answer not in the manual?
General| Sample rates | 32 - 192 kHz |
|---|---|
| Product color | Black |
| Frequency range | 20 - 22000 Hz |
| Signal-to-Noise Ratio (SNR) | -125 dB |
| Total Harmonic Distortion (THD) | 0.0005 % |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 26 W |
Weight and Dimensions| Depth | 383 mm |
|---|---|
| Width | 435 mm |
| Height | 133 mm |
| Weight | 8100 g |
| Quantity per pack | 1 pc(s) |
General advice on safe operation, handling, environment, and basic warnings.
Detailed precautions against lightning, surges, fire hazards, and electric shock.
Conditions requiring service and guidelines for replacement parts.
Battery disposal, FCC compliance, environmental protection, and model number recording.
Initial setup steps, package contents, and location selection for the M12.
Procedure to restore the M12 to its original factory default settings.
Identifies and describes all controls located on the M12's front panel.
Identifies and describes all rear panel inputs, outputs, and connections.
Guide to operating the M12, including navigation and core functions.
Explanation of display menus like Main, Media, and various listening Modes.
Configuring Tone Controls (EQ), Speaker Setup, and Source inputs.
Adjusting volume, digital output, and control settings like Auto Standby.
Exploring IR channel functionality and USB modes for playback and computer connection.
Introduction to the HTRM 2 remote and its basic operation.
Learning commands, copying keys, and creating macro commands with the remote.
Managing illumination, factory reset, and deleting commands on the remote.
Managing code libraries for component control and using search mode.
Step-by-step guide for installing batteries into the HTRM 2 remote control.
Common issues, their causes, and suggested solutions for the M12.
Detailed technical specifications of the NAD M12 Digital Preamp DAC.
To Next Page
