Need help?Do you have a question about the NAD M32 and is the answer not in the manual?
General| Damping factor | 800 |
|---|---|
| Amplifier class | - |
| Frequency range | 20 - 96000 Hz |
| Output impedance | 240 Ω |
| Audio output channels | - channels |
| Peak power per channel | 195 W |
| Signal-to-Noise Ratio (SNR) | 92 dB |
| Total Harmonic Distortion (THD) | 0.005 % |
| Dynamic power per channel (2 Ohm) | 400 W |
| Dynamic power per channel (4 Ohm) | 360 W |
| Dynamic power per channel (8 Ohm) | 220 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 40 W |
| LED indicators | Yes |
| Package weight | 18500 g |
| Product color | Black, Grey |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 396 mm |
|---|---|
| Width | 435 mm |
| Height | 133 mm |
| Weight | 9800 g |
Read all safety and operating instructions carefully.
Proper cleaning, placement, ventilation, and accessory use.
Safe power connection, cord handling, and antenna grounding.
Protection against lightning, power lines, and overloading.
Preventing hazards from flames, liquids, objects, and headphone volume.
Conditions requiring service and using correct replacement parts.
Battery disposal, safety checks, and wall/ceiling mounting guidelines.
FCC compliance, CE marking, and environmental protection.
Guidance on recording the product's model and serial numbers.
Contents, packaging, location choice, and factory reset procedures.
Description of the M32's front panel indicators, buttons, and display.
Overview of rear panel digital, computer, and speaker connectors.
Details on power, digital inputs, computer, and output terminals.
Information on MDC upgrades, HDMI, and BluOS module connections.
Using the touch panel to select sources and navigate menus.
Controlling playback, modes, and settings via touch panel and remote.
Understanding Main, Media, Mode, EQ, and Setup displays.
Adjusting tone controls, speaker impedance, and subwoofer settings.
Configuring subwoofer modes, frequency, and enabling/disabling sources.
Configuring auto standby, IR channel, and computer audio setup.
Upgrading, rebooting, and resetting the BluOS module.
Introduction to the HTRM 2 remote and its device selector pages.
Learning, copying, punch-through, and macro commands.
Configuring key illumination, factory reset, and delete mode.
Loading code libraries, using search mode, and checking library numbers.
Instructions for inserting AA batteries into the remote control.
Detailed technical specifications for the NAD M32 amplifier.
To Next Page
