TY-GC31-004A 4/24
Rev.B
Analog output
1 - 5 VDC, 1 output
Output accuracy : ±1.5 %F.S. (for indication)
Response :Less than 50 ms
Resolution :Approx. 30 mV DC
Load resistance :10 kΩ min.
Heat run time More than 15 min.
Operating -10 to 50 ℃, 35 to 85 %RH (No condensation / freezing allowed)
temperature range
Storage -20 to 60 ℃, 35 to 85 %RH (No condensation / freezing allowed)
temperature range
Withstand voltage 300 VAC, 1 min.
Case construction IP 40 (For interior use)
Case material Front case part : PC/ABS
Rear case part : ADC 12
Wetted part material Sensor part : SUS 630 (17-4 PH)
Fitting part : SUS 304
Mounting clamp Key / L-shaped bracket : SPCC (t1.6)
material(Option) Panel adaptor : PC/ABS *2
Cable Length 2 m
Conductor :0.18 sq (7/0.18), Coated outer diameter : 0.86(㎜)
Sheath :Outer diameter : 4(㎜), Material: PVC
Weight Approx. 120g (Including 2 m cable)
EMC Directive *3 Applicable directive 89/336/EEC
Applicable standards
EN61326:1997/A1:1998/A2:2001/A3:2003
*1 Factory default
*2 For horizontal mounting only (GC31-3□4). Vertical mounting (GC31-1□4) is not
available.
*3 Please connect this unit to indoor distribution network which is free from any
overvoltage such as thunder, etc.
To Next Page
Loading...
Need help?
General
