Specifications
Type Streamer amplifier
Number of channels
Line 4
Amp 2
Power
(Low Impedance)
8 150W
4 260W
Input connections
Analogue – Stereo RCA - (47k / 2.5V RMS)
S/PDIF – up to 96kHz / 24bit
HDMI eARC – LPCM up to 192kHz / 24bit Stereo
Output connections
Main: 1 Stereo RCA
Amplified: Terminal block / Euroblock / Banana connector - 4mm
Sub/Aux : 1 Stereo RCA
Compatible streaming services
TIDAL
TIDAL Connect
Spotify Connect - Free + Premium support
Qobuz
UPnP with play queue
Internet Radio + Podcast Airplay 2
ChromeCast v2
Dante Receiver - 48kHz supported
Bluetooth Classic Audio Receiver. SBC + AAC supported
User interface
Focal & Naim App – Basic use
Focal & Naim Manager - Configuration
Compatible operating systems
iOS and Android for Focal & Naim App
Windows, MacOS for Focal & Naim Manager
Multiroom
Naim Multiroom – Up to 32 devices on a single session
Compatible with all generations of Naim streamers
Integration partners Control4, Crestron, EAN, Savan
Wired automation 2 x 1/8" (3.5mm) mono jack connectors - 12V trigger outputs
Network
RJ45 Gigabit Ethernet – compatible with IPv4 and IPv6
802.11ax (Wi-Fi 6) - 2x2 MIMO – External antenna
Bluetooth® LE 5.1 – External antenna shared with Wifi1
Total Harmonic Distortion (THD+N@1kHz) <0,006%
Gain 29dB
Signal-to-noise ratio 110dB(A-Weighted)
Frequency response (-3dB) 5Hz - 70kHz
Max sampling rate 32bit / 384kHz
Operating power supply 100V to 240V +/-10%, 50/60Hz
Rack Height 1U
Dimensions (HxLxD) 1
3/4
x 11
3/4
x 11
3/4"
(4.45x30x30cm)
Weight 9.9lbs (4.5kg)
Nominal power consumed 70W
Power consumption in standby mode 0.5W
Operating temperature 5°C to 35°C
Storage temperature -20°C to 60°C
Specifications
Type Streamer amplifier
Number of channels
Line 4
Amp 2
Power
(Low Impedance)
8 150W
4 260W
Input connections
Analogue – Stereo RCA - (47k / 2.5V RMS)
S/PDIF – up to 96kHz / 24bit
HDMI eARC – LPCM up to 192kHz / 24bit Stereo
Output connections
Main: 1 Stereo RCA
Amplified: Terminal block / Euroblock / Banana connector - 4mm
Sub/Aux : 1 Stereo RCA
Compatible streaming services
TIDAL
TIDAL Connect
Spotify Connect - Free + Premium support
Qobuz
UPnP with play queue
Internet Radio + Podcast Airplay 2
ChromeCast v2
Dante Receiver - 48kHz supported
Bluetooth Classic Audio Receiver. SBC + AAC supported
User interface
Focal & Naim App – Basic use
Focal & Naim Manager - Configuration
Compatible operating systems
iOS and Android for Focal & Naim App
Windows, MacOS for Focal & Naim Manager
Multiroom
Naim Multiroom – Up to 32 devices on a single session
Compatible with all generations of Naim streamers
Integration partners Control4, Crestron, EAN, Savan
Wired automation 2 x 1/8" (3.5mm) mono jack connectors - 12V trigger outputs
Network
RJ45 Gigabit Ethernet – compatible with IPv4 and IPv6
802.11ax (Wi-Fi 6) - 2x2 MIMO – External antenna
Bluetooth® LE 5.1 – External antenna shared with Wifi1
Total Harmonic Distortion (THD+N@1kHz) <0,006%
Gain 29dB
Signal-to-noise ratio 110dB(A-Weighted)
Frequency response (-3dB) 5Hz - 70kHz
Max sampling rate 32bit / 384kHz
Operating power supply 100V to 240V +/-10%, 50/60Hz
Rack Height 1U
Dimensions (HxLxD) 1
3/4
x 11
3/4
x 11
3/4"
(4.45x30x30cm)
Weight 9.9lbs (4.5kg)
Nominal power consumed 70W
Power consumption in standby mode 0.5W
Operating temperature 5°C to 35°C
Storage temperature -20°C to 60°C
Specifications
+
+
+
x
x
To Next Page
Loading...
