Need help?Do you have a question about the NAIM SUPERNAIT 3 and is the answer not in the manual?
General| Power Output | 80W per channel into 8 ohms |
|---|---|
| Weight | 14 kg |
| Inputs | 2 x RCA |
| Outputs | Preamp |
| Frequency Response | 10Hz - 20kHz |
| Dimensions | 87 mm x 432 mm x 314 mm |
| Input Sensitivity | 130mV |
| Input Impedance | 47k ohms |
| Mains Supply | 115V or 230V; 50 or 60Hz |
| Headphone Output | 6.35mm jack |
| Distortion | Less than 0.1% |
Guidance on selecting and connecting interconnect cables for optimal audio performance.
Details on the importance, length, and orientation of loudspeaker cables for sound quality.
Guidance on correct mains plug wiring and safety precautions for non-rewirable plugs.
Information on the location, function, and replacement of equipment fuses for safety and operation.
Advice on siting equipment, switching procedures, running-in, and lightning protection.
Addressing potential radio interference issues and general troubleshooting guidance.
Details mains power, signal inputs, speaker outputs, and AV bypass for the SUPERNAIT 3.
Explains power amp mode, other outputs, upgrades, and interface options for the SUPERNAIT 3.
Details mains power, signal inputs, speaker outputs, and AV bypass for the NAIT XS 3.
Explains power amp mode, other outputs, upgrades, and interface for the NAIT XS 3.
Details mains power, signal inputs, speaker outputs, and HDD output for the NAIT 5si.
Explains headphone output, input switching, AV bypass, and operational functions for the NAIT 5si.
Guide to configuring and operating the remote handset with Naim CD players and amplifiers.
Description of individual keys and their functions on the NARCOM 5 remote handset.
To Next Page
