NAIM SUPERNAIT 3 - Specifications

E16
15. NARCOM 5 Remote Handset
15.1 Using NARCOM 5
NARCOM 5 can be congured to operate preampliers,
tuners or CD players by pressing the appropriate System
Component Key.
Note: The “rec” system component key enables record
side input, mute and mono selection on appropriately
equipped preampliers.
NARCOM 5 keys behave as described below:
disp: Selects illumination options.
numeric: Selects preamplier inputs, CD tracks or tuner
presets or frequencies.
: Repeats a CD or CD playlist.
prog: Press and hold to select preamplier program
mode. Enables CD playlist programming and
tuner preset management.
vol (– / +): Adjusts volume and volume control position.
mute: Mutes and restores volume.
bal (– / +): Adjusts channel balance.
mon : Enables a record device output to be heard
while recording. Alternatively, selects mono
mode on some products.
: CD play, pause, previous, next and stop.
: CD fast reverse and forward. The keys can
also select preamplier inputs and FM radio
frequencies.
mode: Selects FM frequency, scan and preset modes.
scan: Selects tuner scan mode. When a station is
found the scan will pause. A second press will
resume the scan.
15.2 NARCOM 5 keys
The NARCOM 5 is a multifunctional remote handset designed specically for Naim CD players, analogue tuners and
preampliers (including integrated ampliers). To t batteries, remove the battery cover and insert the batteries into the
body taking care with their orientation. Replace the battery cover.
disp
repeat
prog
mode
scan
system
component
keys
fast forward and
reverse
balance
numeric
volume, mute,
and mon and CD
transport