Need help?Do you have a question about the Nakamichi BX-100 and is the answer not in the manual?
General| Brand | Nakamichi |
|---|---|
| Model | BX-100 |
| Category | Cassette Player |
| Language | English |
Check record/playback and erase head tape guide height using a small block and shims.
Verify head base stroke by checking clearance between reference pin and base.
Align record/playback head azimuth and check height using VTVM and test tapes.
Adjust reel motor speed in play mode using a torque meter.
Adjust tape speed to 3,000 Hz using a frequency counter and test tape.
Adjustments for tape speed, meter level, and MPX filter.
Alignment of record/playback head and calibration of playback level.
Adjust playback frequency response, especially peaking, for gap loss compensation.
Adjustments for bias oscillation frequency, erase current, and record level.
Calibrate record level and bias current for different tape types (ZX, SX, EXII).
Adjust playback frequency response, especially peaking, for gap loss compensation.
Check Dolby NR IC operation and frequency response accuracy.
Complete schematic diagram of the Nakamichi BX-100/BX-100E.
To Next Page
