Need help?Do you have a question about the Nakamichi BX-1 and is the answer not in the manual?
Power| power source | 100, 120, 120/220-240, 220 or 240V AC; 50/60Hz |
|---|---|
| power consumption | 23 W max. |
Audio Performance| frequency response | 20 Hz-20, 000 Hz |
|---|---|
| signal-to-noise ratio | Better than 62 dB |
| total harmonic distortion | Less than 1.0% |
Physical Characteristics| dimensions (W x H x D) | 430 x 110 x 250 mm |
|---|---|
| dimensions (W x H x D) (inches) | 16-1 5/16 x 4-5/16 x 9-7/8 inches |
| approximate weight | 5.5 kg |
Describes how to protect recordings from erasure by removing cassette tabs.
Details the correct procedure for inserting and removing cassette tapes from the deck.
Instructions for playing audio from cassette tapes, including using pause and stop.
Recommendations for tape selector and equalizer settings based on tape type.
Step-by-step guide on how to record audio onto cassette tapes with level adjustments.
Instructions for setting up unattended recording or playback using an external timer.
Detailed steps for cleaning the tape heads, capstan, and pinch roller for optimal performance.
Explains the process and frequency for demagnetizing the deck's heads and capstan.
Guidance on how to clean the exterior surfaces of the cassette deck.
Information regarding the lubrication requirements for the deck's moving parts.
To Next Page
