Need help?Do you have a question about the Nakamichi BX-300 and is the answer not in the manual?
Power| power source | 100, 120, 120/220-240, 220 or 240V AC, 50/60 Hz |
|---|---|
| power consumption | 27W max |
Tape and Playback| tape speed | 1-7/8 ips (4.8 cm/sec.) ±0.5% |
|---|---|
| wow-and-flutter | Less than 0.048% WTD peak |
| frequency response | 20 Hz - 20, 000 Hz ±3 dB |
Dimensions and Weight| dimensions (W x H x D) | 430 x 100 x 250 millimetres, 16-15/16 x 3-15/16 x 9-7/8 inches |
|---|---|
| approximate weight | 5.6 kg, 12 lb 6 oz |
Procedure for adjusting the tilt of the record and playback heads.
Steps for aligning playback and record heads for optimal performance.
Procedure for adjusting reel motor speed during play mode.
Procedure for calibrating the tape speed using a frequency counter.
General instructions and sequence for performing electrical adjustments.
Procedure for adjusting playback frequency response for accuracy.
Diagram and parts list for the input amplifier PCB.
Diagram and parts list for the main PCB.
Graph showing playback frequency response curves.
Graph showing record current frequency response.
Comprehensive wiring diagram illustrating all connections.
Detailed technical specifications for the cassette deck.
To Next Page
