Nakamichi CR-2 User Manual

Nakamichi
CiR-2/CIR-1
2 Head Cassette Deck
Owner's Manual
Bedienungsanleitung
Mode d’Emploi
This Owner’s Manual covers the following models:
Diese Bedienungsanleitung gilt fir die folgenden Modelle:
Le mode d’emploi couvre les modéles suivants:
CR-2 CR-2A CR-2E
CR-1 CR-1A CR-1E

Nakamichi CR-2 Specifications

General

Track System	4-track, 2-channel stereo
Type	Cassette Deck
Tape Speed	4.76 cm/s
Motor	DC Servo Motor
Tape Type	Type I
Noise Reduction	Dolby B
Frequency Response	20 Hz to 20 kHz
Input	Line
Output	Line
Inputs	1 x RCA
Outputs	1 x RCA
Signal to Noise Ratio	72dB (Dolby C)

Summary

Nakamichi Cassette Deck Controls and Features

Tape Transport Buttons

Controls for Rewind, Stop, Play, Fast-Forward, and Record operations.

Tape Selector and EQ Switch

Settings for tape type (EX, SX, ZX) and equalization (120µs/70µs).

Recording Level and Balance Controls

Adjusts input level and left/right channel balance during recording.

Playback Operation

Recording Operation

Timer Recording or Playback

Bias Adjustment

Record Level Setting

Independent EQ Switch

Cleaning and Demagnetization

Cleaning Procedure

Instructions for cleaning head assembly, capstans, and pressure rollers.

Demagnetization

Guidance on removing residual magnetism from heads and capstans.

Troubleshooting

Tape Transport Issues

Solutions for tape not running or fluctuating between modes.

Recording and Playback Problems

Addressing issues like no recording/playback or dull sound.

Sound Level and Noise Issues

Fixing uneven sound levels, dropouts, wow/flutter, and hum.

Specifications Overview