Do you have a question about the Nakamichi CR-5 and is the answer not in the manual?
Track System | 4-track, 2-channel stereo |
---|---|
Motor | DC Servo Motor |
Noise Reduction | Dolby B, Dolby C |
Signal to Noise Ratio | 72dB (dolby C) |
Tape Type | CrO2, Metal |
Frequency Response | 20Hz - 20kHz (Metal tape) |
Input | 50mV (line) |
Output | Line Out |
Heads | 3 (Play, Record, Erase) |
Steps for preparing, playing, and recording cassette tapes.
Adjusting bias for optimal sound quality and character.
Instructions for cleaning heads, capstans, and other critical parts.
Detailed technical data for the deck and remote control.
Solutions for problems like tape not running or record mode issues.
Addressing hiss, distortion, and uneven sound levels.
Troubleshooting playback failures, remote control issues, and hum.