Need help?Do you have a question about the Nakamichi CR-7 and is the answer not in the manual?
Adjusts tilt, stroke, azimuth, and height for optimal performance.
Calibrates the capstan motor speed for accurate playback.
Explains how to use test equipment for calibration.
Step-by-step guides for various electrical calibrations.
Illustrates electrical interconnections between all unit sections.
Adjusts tilt, stroke, azimuth, and height for optimal performance.
Calibrates the capstan motor speed for accurate playback.
Explains how to use test equipment for calibration.
Step-by-step guides for various electrical calibrations.
Illustrates electrical interconnections between all unit sections.
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Type | Cassette Deck |
| Heads | 3 (Record, Playback, Erase) |
| Motor | DC Servo |
| Tape Type | Type I, II, IV |
| Frequency Response | 20Hz - 20kHz (Metal Tape) |
| Total Harmonic Distortion | 0.8% |
| Input | 50mV (line) |
| Output | Line Out |
To Next Page
