EasyManua.ls Logo

Nanni 4.200HE - Page 24

Nanni 4.200HE
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S-7
03-M Series, WSM
DIESEL ENGINE
W1014322
Symptom Probable Cause Solution
Reference
Page
Low Oil Pressure Engine oil insufficient Replenish S-18
Oil strainer clogged Clean S-63
Relief valve stuck with dirt Clean –
Relief valve spring weaken or broken Replace –
Excessive oil clearance of crankshaft bearing Replace S-67, 84,
85, 86,
87
Excessive oil clearance of crankpin bearing Replace S-64, 83
Excessive oil clearance of rocker arm Replace S-54, 73
Oil passage clogged Clean –
Different type of oil Use specified type of
oil
S-20
Oil pump defective Replace S-62, 90,
91
High Oil Pressure Different type of oil Use specified type of
oil
S-20
Relief valve defective Replace –
Engine Overheated Engine oil insufficient Replenish S-20
Fan belt broken or elongated Replace or adjust S-23, 31
Coolant insufficient Replenish S-19
Radiator net and radiator fin clogged with dust Clean –
Inside of radiator corroded Clean or replace S-29
Coolant flow route corroded Clean or replace S-29, 30
Radiator cap defective Replace S-92
Overload running Reduce the load –
Head gasket defective Replace S-55
Incorrect injection timing Adjust S-95
Unsuitable fuel used Use specified fuel –
Battery Quickly
Discharge
Battery electrolyte insufficient Replenish distilled
water and charge
S-22, 32
Fan belt slips Adjust belt tension or
change
S-22, 23,
31
Wiring disconnected Connect –
Rectifier defective Replace S-103, 107
Alternator defective Replace S-103, 106,
107
Battery defective Replace –
KiSC issued 08, 2012 A

Table of Contents