Technical specifications
3030
* At engine fl ywheel, as per ISO 8665-1
Certain specifi cations may vary depending on your order.
The recommended cruising speed is 200 rpm under the maximum rpm speed at full throttle
ENGINE SPECIFICATIONS H4.115 H4.130 H4.150 H4.170
Cycle 4 strokes Diesel
Max. power - kW (hp)* 84.6 (115) 97 (130) 111 (150) 126 (170)
Number of cylinders / Arrangement 4 in line
Displacement (cm
3
) 1991
Distribution 4 valves per cylinder
Compression rate 17.5 : 1
Aspiration Turbocompresseur et intercooler
Bore x stroke (mm) 83 x 92
Maximum rpm speed at full throttle (rpm)* 3000 ± 50 tr/min 4000 ± 50 tr/min
Idle rpm speed (rpm)* 700 ± 50 tr/min 700 ± 50 tr/min
No load rpm speed (rpm)* 3120 ± 50 tr/min 4120 ± 50 tr/min
Theoric fuel consumption (l/h) 21.8 @ 3000 tr/min 29.5 @ 4000 tr/min 34.1 @ 4000 tr/min 37.4 @ 4000 tr/min
Weight without gearbox (kg) 250
INJECTION SYSTEM H4.115 H4.130 H4.150 H4.170
Injection Direct Common Rail
Injection order 1-3-4-2
Injection pump BOSCH Common Rail (CRS 2.0)
Injection pressure (bar) 1600
LUBRICATION H4.115 H4.130 H4.150 H4.170
Type Forced by pump
Pressure at idle rpm speed (bar) 1 - 4
Capacity (engine on an horizontal axis) 3.2 mini - 4.2 maxi
COOLANT H4.115 H4.130 H4.150 H4.170
Pressure setting of the plug (bar) 1.2
Coolant capacity (50% water - 50% antifreeze) 7.7
ELECTRICAL H4.115 H4.130 H4.150 H4.170
Starter (kW) 2
Battery capacity (Ah) 100-120
Alternator (V/A) 12V / 110A
To Next Page
Loading...
Need help?
General
