What to do if vertical column of print is missing on Nanoptix Printer?
If a vertical column of print is missing on your Nanoptix printer, first change the paper stack to ensure the thermal coating isn't the issue. If the problem continues, contact your authorized service representative, as it may indicate an issue with the printer electronics.
FCC statement regarding Class B digital device compliance and potential interference.
IC statement on Class B digital apparatus meeting Canadian interference regulations.
Specifies CSA/UL listed power supply parameters for compliance with safety and marking requirements.
Details LED error codes and their corresponding conditions for troubleshooting printer problems.
Covers common printing issues like light print, missing columns, or partial printing, with causes and solutions.
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Connectivity | USB, Serial, Ethernet |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Print Speed | Up to 8 inches per second (203 mm/s) |
| Power Supply | 24 VDC |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% RH, non-condensing |
To Next Page
