$50('
5($'<
6<67(0
9
),5(
$&
=21(
=21(
=21(
=21(
=21(
=21(
4
Ke
ad Controls and Indicators
Read
Li
ht
will light when all zones are secure
and system is ready to be Armed.
AC Li
ht
will light to indicate that AC Power
is present.
Fire Alarm Li
ht
will flash and the Keypad
sounder will beep when system is in a Fire Alarm
Condition (See Silencing a fire Alarm, Page 8)
Zone Li
hts
1 through 6)
will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
Armed Li
ht
will light when system is Armed,
and will flash when system is in Alarm
Key - used to reset Fire Zone, clear miss-
entered codes, reset Alarm Memory, etc..
9
9
System Light will light and the Keypad sounder
will pulse to indicate that a system trouble is pre-
sent.(See System Troubles, Page12)
9
9
Key Press to display any present
System troubles. Only available when
9
9
System Light is lit.
(See System troubles, Page 12)
Emergency Keys Press
simultaneously to signal
an emergency condition.
Press
)
+
)
for Fire,
$
+
$
for Auxiliary or
3
+
3
for Police Emer-
gency. (Programmable)
Bypass Key Used to
bypass zones. Press
Bypass and the corre-
sponding zone number,
and then Arm system.
Key Used to enable
special functions and op-
tions. Press
and then
the corresponding Spe-
cial Function number Op-
tion (See Special Func-
tions, Page 11)
Numerical Keys 1-9, 0. Used to enter
User Codes, Zone numbers, etc.
NAPCO
Oi218a
page 4
Tuesday, September 16, 1997 08:28
To Next Page
Loading...
Need help?
General
