EasyManuals Logo

NAPCO XP-600 Express Series User Manual

NAPCO XP-600 Express Series
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Special Functions
By pressing
followed by the appropriate key, (do not press simultaneously) these special functions and features
can be enabled:

Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed by
pressing
followed by
. This will allow the easy
arming of the system by someone who is not a regular
system user.

Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave
the premises without disarming the system. Pressing
followed by
while the system is armed will start a 3
minute period, during which you can leave through the
Exit/ Entry door.

Bell / Battery Test
Pressing
followed by
will cause the bell, or siren to
sound for 2 seconds. This will also initiate a test of your
battery to make sure it is adequately charged. The XP-600
also performs an automatic battery test very 24 hours

Access Output
If programmed, pressing
followed by
will activate
the Access Output which may be configured to open a door
strike, turn on lighting, or activate some other special
feature your installer has provided.

Instant Mode
Pressing
followed by
will cancel the Entry delay
and put the system into the “Instant” mode. This is typic-
ally done in the evening when all family members are home
for the night. When the system is disarmed, the Instant
mode will be canceled.

Chime Mode On / Off
Pressing
followed by
will activate / deactivate the
door chime. Activating this feature will cause any door
to beep the keypad sounder when it is opened.

Program Mode
Pressing
followed by
will enable the “Program
Mode”, which will allow you to program and erase user
codes. (see Programming user codes, page 14)

Keypad Sounder On / Off
Pressing
followed by
will deactivate / activate the
keypad sounder, depending on its present state. By
activating sleep mode on a keypad installed in a bedroom,
for example, you effectively turn off that keypad’s sounder.
However, any other keypads on the system will still sound
normally.
11
Oi218a
page 11
Tuesday, September 16, 1997 08:28
www.ealarm.com.my

Other manuals for NAPCO XP-600 Express Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NAPCO XP-600 Express Series and is the answer not in the manual?

NAPCO XP-600 Express Series Specifications

General IconGeneral
BrandNAPCO
ModelXP-600 Express Series
CategorySecurity System
LanguageEnglish

Related product manuals